SEARCH NOW FOR ALL YOUR ROBB JACK SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Cutting HSS & Solid Carbide / End Mill
Radwell is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
Sorting/Paging
ROBB JACK
GM-402-04
SQUARE END MILL: 1/8'' DIA, 5/8'' LOC, 1/8'' SHANK DIA, 3'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, DIAMOND FINISH, SPIRAL FLUTE, 30 ° HELIX, CENTERCUTTING, RH CUT, SERIES GM-402
€337.09
Buy Surplus As Low As
€203.01
€203.01
ROBB JACK
NR-204-16.5
SQUARE END MILL: 33/64'' DIA, 1'' LOC, 1/2'' SHANK DIA, 3'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES NR-204
€152.02
Buy Surplus As Low As
€91.59
€91.59
ROBB JACK
NR-204-18
SQUARE END MILL: 9/16'' DIA, 1-1/4'' LOC, 9/16'' SHANK DIA, 3-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES NR-204
€181.29
Buy Surplus As Low As
€109.53
€109.53
ROBB JACK
STR-303-09-C
9/32" DIAM, FINE PITCH, 3/4" LOC, 3 FLUTE SOLID CARBIDE ROUGHING SQUARE END MILL TICN FINISH, 2-1/2" OAL, 5/16" SHANK DIAM, SINGLE END, CENTERCUTTING, 30° HELIX
€117.08
Buy Surplus As Low As
€70.82
€70.82
ROBB JACK
ST-434-04-C
1/8" DIAM 4 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 1-1/2" OAL, 1/2" LOC, 1/8" SHANK DIAM, 30° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€55.71
Buy Surplus As Low As
€33.99
€33.99
ROBB JACK
ST-434-06-A
3/16" DIAM 4 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 2" OAL, 5/8" LOC, 3/16" SHANK DIAM, 30° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€80.26
Buy Surplus As Low As
€48.16
€48.16
ROBB JACK
ST-434-04-A
1/8" DIAM 4 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 1-1/2" OAL, 1/2" LOC, 1/8" SHANK DIAM, 30° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€55.71
Buy Surplus As Low As
€33.99
€33.99
ROBB JACK
STR-301-20-A
SQUARE END MILL: 5/8'' DIA, 7/8'' LOC, 5/8'' SHANK DIA, 3-1/2'' OAL, 3 FLUTES, SOLID CARBIDE SINGLE END, ALTIN FINISH, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE, SERIES STR-301
€294.60
Buy Surplus As Low As
€177.52
€177.52
ROBB JACK
ST-430-08-T
SQUARE END MILL: 1/4'' DIA, 3/4'' LOC, 1/4'' SHANK DIA, 2-1/2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, TIN FINISH, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE, SERIES ST-430
€80.26
Buy Surplus As Low As
€48.16
€48.16
ROBB JACK
ST-430-10-T
SQUARE END MILL: 5/16'' DIA, 13/16'' LOC, 5/16'' SHANK DIA, 2-1/2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, TIN FINISH, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE, SERIES ST-430
€94.42
Buy Surplus As Low As
€56.65
€56.65
ROBB JACK
ST-343-12-C
3/8" DIAM 3 FLUTE SOLID CARBIDE 0.005 TO 0.007" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 2-1/2" OAL, 7/8" LOC, 3/8" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€112.36
Buy Surplus As Low As
€67.98
€67.98
ROBB JACK
STR-301-14-C
7/16" DIAM, FINE PITCH, 5/8" LOC, 3 FLUTE SOLID CARBIDE ROUGHING SQUARE END MILL TICN FINISH, 2-3/4" OAL, 7/16" SHANK DIAM, SINGLE END, CENTERCUTTING, 30° HELIX
€175.63
Buy Surplus As Low As
€105.75
€105.75
ROBB JACK
ST-430-05-T
SQUARE END MILL: 5/32'' DIA, 9/16'' LOC, 3/16'' SHANK DIA, 2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, TIN FINISH, 30 ° HELIX, CENTERCUTTING, RH CUT, RH FLUTE, SERIES ST-430
€67.04
Buy Surplus As Low As
€40.60
€40.60
ROBB JACK
ST-343-16-A
1/2" DIAM 3 FLUTE SOLID CARBIDE 0.006 TO 0.009" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 3" OAL, 1" LOC, 1/2" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€153.91
Buy Surplus As Low As
€92.53
€92.53
ROBB JACK
ST-343-08-A
1/4" DIAM 3 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 2-1/2" OAL, 3/4" LOC, 1/4" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€86.87
Buy Surplus As Low As
€52.88
€52.88
ROBB JACK
STR-301-12-C
3/8" DIAM, FINE PITCH, 5/8" LOC, 3 FLUTE SOLID CARBIDE ROUGHING SQUARE END MILL TICN FINISH, 2-1/2" OAL, 3/8" SHANK DIAM, SINGLE END, CENTERCUTTING, 30° HELIX
€129.36
Buy Surplus As Low As
€78.37
€78.37
ROBB JACK
ST-343-16-C
1/2" DIAM 3 FLUTE SOLID CARBIDE 0.006 TO 0.009" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 3" OAL, 1" LOC, 1/2" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€153.91
Buy Surplus As Low As
€92.53
€92.53
ROBB JACK
ST-341-20-A
5/8" DIAM 3 FLUTE SOLID CARBIDE 0.009 TO 0.011" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 3-1/2" OAL, 3/4" LOC, 5/8" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€219.06
Buy Surplus As Low As
€132.19
€132.19
ROBB JACK
ST-646-12-A
3/8" DIAM 6 FLUTE SOLID CARBIDE 0.005 TO 0.007" CORNER RADIUS END MILL ALTIN FINISH, 2-1/2" OAL, 7/8" LOC, 3/8" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€122.75
Buy Surplus As Low As
€73.65
€73.65
ROBB JACK
ST-343-10-C
5/16" DIAM 3 FLUTE SOLID CARBIDE 0.004 TO 0.006" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 2-1/2" OAL, 13/16" LOC, 5/16" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€96.31
Buy Surplus As Low As
€58.54
€58.54
ROBB JACK
ST-341-04-C
1/8" DIAM 3 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 1-1/2" OAL, 1/4" LOC, 1/8" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€43.43
Buy Surplus As Low As
€26.44
€26.44
ROBB JACK
ST-341-12-C
3/8" DIAM 3 FLUTE SOLID CARBIDE 0.005 TO 0.007" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 2-1/2" OAL, 5/8" LOC, 3/8" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€93.48
Buy Surplus As Low As
€56.65
€56.65
ROBB JACK
ST-630-12-T
3/8", 7/8" LOC, 3/8" SHANK DIAM, 2-1/2" OAL, 6 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, TIN FINISH, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES S ...
€112.36
Buy Surplus As Low As
€67.98
€67.98
ROBB JACK
ST-341-10-A
5/16" DIAM 3 FLUTE SOLID CARBIDE 0.004 TO 0.006" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 2-1/2" OAL, 1/2" LOC, 5/16" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€82.15
Buy Surplus As Low As
€50.04
€50.04
ROBB JACK
SS-4-060
SQUARE END MILL: 1/16'' DIA, 3/32'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-4
€33.05
Buy Surplus As Low As
€19.83
€19.83
ROBB JACK
ST-341-06-C
3/16" DIAM 3 FLUTE SOLID CARBIDE 0.003 TO 0.005" CHAMFER WIDTH CORNER CHAMFER END MILL TICN FINISH, 2" OAL, 3/8" LOC, 3/16" SHANK DIAM, 40° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€64.21
Buy Surplus As Low As
€38.71
€38.71
ROBB JACK
ST-434-16-A
1/2" DIAM 4 FLUTE SOLID CARBIDE 0.006 TO 0.009" CHAMFER WIDTH CORNER CHAMFER END MILL ALTIN FINISH, 3" OAL, 1" LOC, 1/2" SHANK DIAM, 30° HELIX, RH CUT, RH FLUTE, CENTERCUTTING
€163.35
Buy Surplus As Low As
€98.20
€98.20
ROBB JACK
SS-2-058
SQUARE END MILL: 0.058'' DIA, 0.087'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
€31.16
Buy Surplus As Low As
€18.88
€18.88
ROBB JACK
SS-4-031
SQUARE END MILL: 1/32'' DIA, 0.0465'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-4
€40.60
Buy Surplus As Low As
€24.55
€24.55
ROBB JACK
SS-4-047
SQUARE END MILL: 3/64'' DIA, 0.0705'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-4
€33.05
Buy Surplus As Low As
€19.83
€19.83
ROBB JACK
SS-2-053
0.053", 0.0795" LOC, 1/8" SHANK DIAM, 1-1/2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIE ...
€31.16
Buy Surplus As Low As
€18.88
€18.88
ROBB JACK
SR-2-044
SQUARE END MILL: 0.044'' DIA, 0.132'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SR-2
€33.05
Buy Surplus As Low As
€19.83
€19.83
ROBB JACK
SR-4-031
SQUARE END MILL: 1/32'' DIA, 0.093'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 4 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SR-4
€42.49
Buy Surplus As Low As
€25.49
€25.49
ROBB JACK
SS-2-020-BN
0.02" DIAM, 0.03" LOC, 2 FLUTE SOLID CARBIDE BALL END MILL UNCOATED, SINGLE END, 1-1/2" OAL, 1/8" SHANK DIAM, SPIRAL FLUTE
€46.27
Buy Surplus As Low As
€28.33
€28.33
ROBB JACK
SR-2-043
0.043", 0.129" LOC, 1/8" SHANK DIAM, 1-1/2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
€33.05
Buy Surplus As Low As
€19.83
€19.83
ROBB JACK
SR-2-033
SQUARE END MILL: 0.033'' DIA, 0.099'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SR-2
€33.05
Buy Surplus As Low As
€19.83
€19.83
ROBB JACK
SR-2-050
SQUARE END MILL: 3/64'' DIA, 0.15'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SR-2
€33.05
Buy Surplus As Low As
€19.83
€19.83
ROBB JACK
SR-2-037
0.037", 0.111" LOC, 1/8" SHANK DIAM, 1-1/2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
€33.05
Buy Surplus As Low As
€19.83
€19.83
ROBB JACK
SR-2-030-BN
0.03" DIAM, 0.09" LOC, 2 FLUTE SOLID CARBIDE BALL END MILL UNCOATED, SINGLE END, 1-1/2" OAL, 1/8" SHANK DIAM, SPIRAL FLUTE
€44.38
Buy Surplus As Low As
€27.38
€27.38
ROBB JACK
SR-2-042
0.042", 0.126" LOC, 1/8" SHANK DIAM, 1-1/2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
€33.05
Buy Surplus As Low As
€19.83
€19.83
ROBB JACK
SS-2-010
SQUARE END MILL: 0.01'' DIA, 0.015'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
€59.49
Buy Surplus As Low As
€35.88
€35.88
ROBB JACK
SR-2-027
0.027", 0.081" LOC, 1/8" SHANK DIAM, 1-1/2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
€36.83
Buy Surplus As Low As
€22.66
€22.66
ROBB JACK
SR-2-026
SQUARE END MILL: 0.026'' DIA, 5/64'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SR-2
€36.83
Buy Surplus As Low As
€22.66
€22.66
ROBB JACK
SR-2-035
SQUARE END MILL: 0.035'' DIA, 0.105'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SR-2
€33.05
Buy Surplus As Low As
€19.83
€19.83
ROBB JACK
SS-2-006
SQUARE END MILL: 0.006'' DIA, 0.012'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SS-2
€71.76
Buy Surplus As Low As
€43.43
€43.43
ROBB JACK
SR-2-020-BN
0.02" DIAM, 0.06" LOC, 2 FLUTE SOLID CARBIDE BALL END MILL UNCOATED, SINGLE END, 1-1/2" OAL, 1/8" SHANK DIAM, SPIRAL FLUTE
€49.10
Buy Surplus As Low As
€30.22
€30.22
ROBB JACK
SR-2-025-BN
0.025" DIAM, 0.075" LOC, 2 FLUTE SOLID CARBIDE BALL END MILL UNCOATED, SINGLE END, 1-1/2" OAL, 1/8" SHANK DIAM, SPIRAL FLUTE
€46.27
Buy Surplus As Low As
€28.33
€28.33
ROBB JACK
SR-2-051
SQUARE END MILL: 0.051'' DIA, 0.153'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SR-2
€33.05
Buy Surplus As Low As
€19.83
€19.83
ROBB JACK
SR-2-013
SQUARE END MILL: 0.013'' DIA, 0.039'' LOC, 1/8'' SHANK DIA, 1-1/2'' OAL, 2 FLUTES, SOLID CARBIDE SINGLE END, UNCOATED, SPIRAL FLUTE, CENTERCUTTING, RH CUT, RH FLUTE, SERIES SR-2
€46.27
Buy Surplus As Low As
€28.33
€28.33
ROBB JACK
SR-2-016
0.016", 0.048" LOC, 1/8" SHANK DIAM, 1-1/2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
€42.49
Buy Surplus As Low As
€25.49
€25.49